How Much Does It Cost to Unblock a Drain?
On this page
- How Much Does It Cost to Unblock a Drain in Sydney?
- What Affects the Cost of Clearing a Blocked Drain?
- Cost Differences: Sink, Toilet, Shower and Sewer Blockages
- How Much Does High-Pressure Drain Jetting Cost?
- Does CCTV Drain Inspection Cost Extra?
- What If the Drain Needs Repair or Relining?
- How to Compare Quotes From Sydney Plumbers
- Get a Fixed Price for Your Blocked Drain
Most standard blocked drains in Sydney cost between $150 and $650 to clear during business hours, depending on where the blockage is and how it needs to be removed. Jobs that need high-pressure jetting, CCTV inspection or tree root removal usually cost more, while damaged pipes that need relining or replacement sit in a different price bracket altogether. Whether you need a Blocked Drain Sydney plumber for a slow kitchen sink or a backed-up sewer, this guide breaks down the typical blocked drain cost Sydney homeowners can expect, what drives the price up or down, and how to compare quotes with confidence.
All figures below are indicative ranges for residential jobs in 2026. Every property is different, so your final price should always come from a fixed, upfront quote.
How Much Does It Cost to Unblock a Drain in Sydney?
A simple blocked drain in Sydney typically costs $150 to $400 to clear, while a more complex sewer or stormwater blockage usually costs $350 to $900. The cost to unblock a drain depends mainly on the cause of the blockage, where it is, and the equipment needed to clear it.
Here is a quick guide to typical Sydney price ranges:
| Type of job | Indicative cost (business hours) |
|---|---|
| Basic sink, basin or shower clear | $150 to $350 |
| Blocked toilet | $150 to $400 |
| Kitchen drain with grease build-up | $200 to $450 |
| Stormwater drain clear | $250 to $650 |
| Blocked sewer line | $350 to $900 |
| High-pressure jet blasting | $300 to $800 |
| CCTV drain inspection | $250 to $750 |
| Tree root cutting and clearing | $400 to $1,200 |
| After-hours or emergency call-out | $400 to $900 or more |
| Pipe relining (typical residential job) | $2,500 to $9,000 or more |
Many Sydney plumbers also charge a call-out fee of around $80 to $150 on top of the work. At Mr Fix Plumbing & Drains, there is a $0 call-out fee during standard hours (T&Cs apply), and every job starts with a fixed price agreed before any work begins.
What Affects the Cost of Clearing a Blocked Drain?
The cost of clearing a blocked drain is mainly affected by how severe the blockage is, where it sits in your plumbing, how easy it is to reach, and the equipment needed. The time of day matters too, as after-hours work usually costs more than a weekday visit.
Type and severity of the blockage
A minor blockage costs far less to clear than a severe one. A build-up of hair in a shower drain can often be cleared in under an hour with a hand auger or drain machine, while a sewer line packed with tree roots may need cutting, jetting and a camera inspection to finish the job.
Recurring blockages also tend to cost more over time, because they usually point to a deeper problem such as cracked pipes or root intrusion. You can read more about this in our guide on why drains keep blocking.
Location of the blocked pipe
Blockages close to the fixture, such as just below a sink or basin, are the cheapest to clear. Blockages deep in the underground sewer or stormwater line, often many metres from the house, take longer to reach and usually need more powerful equipment, which raises the cost.
Location also affects who pays. In most cases, the property owner is responsible for the private sewer pipes on their land, while Sydney Water is responsible for its main sewer network. If a camera inspection shows the blockage is in the Sydney Water main, the repair is generally not yours to cover.
Accessibility of the drainage system
Easy access keeps the cost down, while hard-to-reach pipes push it up. A plumber can clear a drain quickly when there is a clear inspection opening or gully trap. If the access point is buried, covered by paving or decking, or the pipe runs under a building, extra time is needed to locate and open it.
Older Sydney homes and terraces in areas like the Inner West and Eastern Suburbs often have tight access and ageing clay pipes, which can add time to the job.
Equipment needed for clearing
The equipment used has a big impact on price. Simple blockages can be cleared with a plunger, hand auger or electric drain machine. Tougher blockages caused by grease, silt or roots usually need a high-pressure jetter, specialised root-cutting heads or a CCTV camera, which costs more but removes the blockage properly rather than punching a small hole through it.
After-hours or emergency work
After-hours and emergency work costs more than a standard daytime visit. Late night, weekend and public holiday call-outs typically add a loading, and a full emergency blocked drain job in Sydney often costs $400 to $900 or more.
If sewage is backing up into your home, an emergency call is worth it to prevent damage and health risks. If the drain is only slow, booking a daytime visit can save you money. Mr Fix Plumbing & Drains is available 24/7, and any after-hours loading is explained before work starts.
Cost Differences: Sink, Toilet, Shower and Sewer Blockages
Sink, toilet and shower blockages are usually the cheapest to clear, while sewer blockages cost the most. That is because fixture blockages are close to the surface and easy to reach, while sewer blockages are underground and often caused by roots or pipe damage.
- Kitchen sink: $200 to $450. Kitchen drains often block with grease and food scraps, which can need jetting to fully remove.
- Bathroom basin or shower: $150 to $350. These are usually caused by hair and soap build-up and are normally quick to clear.
- Toilet: $150 to $400. Most toilet blockages are caused by wet wipes, sanitary products or too much paper. The price rises if the blockage is further down the line.
- Laundry drain: $180 to $350. Lint and detergent residue are the usual causes.
- Stormwater drain: $250 to $650. Leaves, silt and roots are common, and jetting is often needed.
- Sewer line: $350 to $900, or more if roots or damage are involved. A blocked sewer often affects several fixtures at once and may cause the outdoor gully trap to overflow.
If more than one fixture is draining slowly or gurgling, the blockage is likely in the main sewer line rather than a single fixture, so expect the cost to be at the higher end.
How Much Does High-Pressure Drain Jetting Cost?
High-pressure drain jetting usually costs between $300 and $800 in Sydney. The price depends on the length of pipe being cleaned, how heavy the build-up is, and whether roots need to be cut out first.
Jet blasting uses water at very high pressure to scour the full width of the pipe wall, removing grease, silt, scale and light root growth. It costs more than a basic drain clear, but it does a far more thorough job, so the drain is less likely to block again soon. For kitchen drains with years of grease or sewer lines with root intrusion, jetting is often the most cost-effective option over time.
Does CCTV Drain Inspection Cost Extra?
Yes, a CCTV drain inspection usually costs extra, typically $250 to $750 as a standalone service in Sydney. When it is done during the same visit as clearing the drain, the combined cost is often lower than booking the two separately.
A CCTV inspection sends a waterproof camera through the pipe to show exactly what is causing the blockage, whether that is roots, a crack, a sag or a foreign object. It is worth paying for when a drain keeps blocking, because it stops you paying for the same clearing job over and over without fixing the cause. It also gives you clear evidence before you commit to a bigger repair. At Mr Fix Plumbing & Drains, we use CCTV drain inspection to show you the footage and explain your options before any repair work begins.
What If the Drain Needs Repair or Relining?
If the drain needs repair or relining, the cost moves well beyond a standard clearing job. Pipe relining for a typical Sydney home usually costs $2,500 to $9,000 or more, while digging up and replacing a damaged pipe can cost $3,000 to $15,000 or more, depending on depth, length and what sits above the pipe.
Pipe relining installs a new, seamless liner inside the existing pipe, sealing cracks and joints that let roots in. It is often cheaper than excavation because there is no need to dig up gardens, driveways or paving, and there is less restoration work afterwards. Mr Fix Plumbing & Drains backs its pipe relining with a 25-year warranty.
Relining is usually worth considering once you are paying for the same blockage to be cleared every few months. Several clearing visits a year can add up to more than a one-off repair, and the blockages will keep coming back until the pipe is fixed. It is also worth checking your home insurance policy, as some policies may cover damage caused by a burst or broken pipe, though the blockage itself is rarely covered.
How to Compare Quotes From Sydney Plumbers
The best way to compare quotes from Sydney plumbers is to check exactly what each quote includes, not just the headline price. A cheap quote that leaves out the call-out fee, jetting or after-hours loading can end up costing more than a slightly higher fixed price.
When comparing quotes, ask:
- Is the price fixed or hourly? A fixed, upfront quote means you know the total before work starts.
- Is there a call-out fee? Some plumbers charge one on top of the job, while others, like Mr Fix, have a $0 call-out fee during standard hours.
- What method will be used? Check whether the quote covers jetting or only basic clearing, as basic clearing may not remove the full blockage.
- Is a CCTV inspection included? For recurring or sewer blockages, a camera inspection helps confirm the cause and that the drain is fully clear.
- Are there after-hours charges? Ask what loading applies for nights, weekends or public holidays.
- What warranty is offered? A good plumber should stand behind their workmanship. Mr Fix Plumbing & Drains offers a lifetime labour warranty on drain clearing.
- Is the plumber licensed and insured? In NSW, plumbing work should be carried out by a licensed plumber.
Be cautious of quotes that seem far below the typical range. They may only cover a quick clear that leaves most of the blockage in the pipe, which often leads to another call-out within weeks.
Get a Fixed Price for Your Blocked Drain
Knowing the typical cost to unblock a drain helps you budget, but the only way to know your exact price is to have the problem assessed. Mr Fix Plumbing & Drains provides blocked drain clearing, jet blasting, CCTV inspections and pipe relining across Sydney, with fixed, upfront quotes and a $0 call-out fee during standard hours (T&Cs apply).
Call Mr Fix Plumbing & Drains on 0480 009 588, available 24 hours a day, 7 days a week across Sydney.